ROPE  /  TAPE  /  SLEEVING  /  CLOTH  /  GASKETS  /  PACKING  /  OTHER PRODUCTS

MECHANICAL PACKING PRODUCTS

NATURAL FIBER (#180-MLF) Square plait braided of fine quality imported flax rovings that have been lubricated with a pure edible tallow and a wax compound Does not contain graphite. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: rotary, reciprocating and centrifugal shafts, stern tubes plungers, hydraulic rams, accumulators,

Industries: pulp & paper mills, marine, waste/waster treatment, steel and mining

Recommended usage: brine, cold water, cold oil, high-pressure rams and accumulators and high-speed shafts.

Service Conditions:
Temperature: 200° F/105°C
pH Range: 5-9 
Pressure: Up to 150 psi (Rotary/centrifugal)
Shaft Speed: Up to 1900 FPM


NATURAL FIBER TEFLON (#220-T) Square plait braided of highest imported flax rovings from which all miscellaneous ingredients have been removed and rovings have been impregnated with Teflon suspensoid and a fine break-in lubricant. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: superior quality stern tube packing; rotary and reciprocating rams, shafts and plungers. Fire hydrants, paper mill service, such as clafins, stock pumps, jordans and hydrofiners

Industries: marine, pulp & paper mills

Recommended usage: cold oil, cold water and brine

Service Conditions:
Temperature: 220° F/104°C
pH Range: 5-9 
Shaft Speed: Up to 1900 FPM 


WHITE HYDRAULIC (#250-W) Highest quality white cotton duck is plied or cross laminated with a heat resistant rubber that provides great tensile strength and durability. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating equipment, end rings, plungers, pistons, compressor valve rods and heavy hydraulic service.

Industries: pulp & paper mills

Recommended usage: oil, phosphate esters, hot and cold water, solvents and air alkalis

Service Conditions:
Temperature: 250° F/121°C
pH Range: 5-9 
Pressure: To 500 psi (static/reciprocating)

Note: Rings can be furnished with butt cut ends, step joint ends, skive cut ends; lengths can also be furnished as rock hard cured, temperature 300°F/149°C


METALLIC (#450-FG) Thin ribbons of a low friction alloy foil spirally wrapped, layer over layer surrounding a small core. Each layer of foil is lubricated with oil and graphite and it is graphited throughout the packing. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating and centrifugal pump rods and valve stems, expansion joints, compressors, boiler feed pumps and asphalt plant agitators.

Industries: boiler, steam, oil and refinery

Recommended usage: gasoline, oil, asphalt, steam, air, ammonia and water 

Service Conditions:
Temperature: 450° F/232°C
pH Range: 4-10 
Pressure: Up to 1000 psi
Shaft Speed: Up to 3600 FPM

Note: Not for use on brass, bronze or plungers


SYNTHETIC LUBRICATED (#450-GS) Braided construction from non-asbestos synthetic fibers. Each strand is lubricated with a special vegetable and marine oil and graphite. When the braiding is finished, the surface of the packing is graphite coated so that the packing does not wick because of the lubricant. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: a very versatile plant maintenance packing for reciprocating and rotary equipment; for use under high and medium pressure service conditions 

Industries: marine, boiler, chemical, oil and refinery

Recommended usage: oil, steam, alkalines, mild acids and brine

Service Conditions:
Temperature: 450° F/232°C
pH Range: 4-10 
Pressure: Up to 300 psi (in dynamic service)
Shaft Speed: Up to 1900 FPM 


SYNTHETIC MOLYBDENUM (#450-M) Braided construction from non-asbestos synthetic yarn. Each strand is individually coated with molybdenum. After braiding, another coating of molybdenum is applied which gives the packing excellent lubricating properties at high temperatures. Sizes: 1/4" to 1" square in increments of 1/16"standard, consult factory for sizes larger than 1". 

Service: rotary, reciprocating and centrifugal pumps

Industries: boiler, pulp and paper mills, power plants

Recommended usage: general service where galvanic action is present and graphite cannot be used.

Service Conditions:
Temperature: -155° F/-104°C to 450° F/232°C 
pH Range: 4-10 
Pressure: Up to 300 psi (rotary/centrifugal)
Shaft Speed: Up to 1900 FPM 


TEFLON® FDA COMPLIANT (#500-FDA) Braided construction from Teflon filament yarn that has been treated with special non-toxic lubricant that meets all FDA requirements. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: any equipment where braided packing is normally used. All services in the food processing industry or any other area where FDA packing is required.

Industries: chemical, food processing

Recommended usage: caustics, pump packing in mining service; centrifugal and rotary pumps in food processing industry; dryers, blenders, cookers and mixers.

Service Conditions:
Temperature: -450° F/-268°C to 500° F/260°C
pH Range: 0-14 
Pressure: Up to 300 psi (rotary/centrifugal)
Shaft Speed: Up to 1500 FPM 


GFO-TEFLON (#500-GT) Braided packing combining 550-GFO® and Teflon® filament fibers. Suitable for applications in severe corrosive conditions where strength is critical.When the braiding is finished, a light coating of an inert break-in lubricant is applied. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all low RPM reciprocating and rotary shafts.

Industries: boiler, valves, chemical, power plant, oil and refinery

Recommended usage: High-pressure, high corrosive service where strength is needed to go along with the lubricating properties of the GFO 

Service Conditions:
Temperature: 500° F/260°C
pH Range: 0-14 
Shaft Speed: Up to 2500 FPM 


KEVLAR-TEFLON (#500-K) Braided Kevlar type of aramid filament yarn where each individual strand is lubricated with Teflon suspensoid and a light inert oil. In its working characteristics, this packing resembles asbestos but is a superior replacement. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating and rotary shafts and all types of equipment where braided asbestos was used in the past

Industries: boiler, chemical, power plant, pulp and paper mills

Recommended usage: general service; general chemical plant applications. Air, oil, mild acids, caustics, solvents, chemicals and gases. Sewage treatment, granular and abrasive service, slurry pumps, sludge pumps, dredge pumps, blenders, mixers, extruders and mud pumps 

Service Conditions:
Temperature: -420° F/-251° C to 500° F/260° 
pH Range: 3-11 
Pressure: Up to 5000 psi (rotary/centrifugal) with normal clearances
Shaft Speed: Up to 1900 FPM 


KEVLAR-TEFLON-FIBERGLASS (#500-KG) Braided Kevlar type of aramid fiber filament yarn where each individual strand is lubricated with Teflon suspensoid and a light inert oil. This braiding is done over a fiberglass center core, making this packing resemble asbestos packing in its working characteristics. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating and rotary shafts and all types of equipment where braided asbestos was used in the past

Industries: boiler, chemical, power plant, oil and refinery

Recommended usage: general service; general chemical plant service and applications. Mild acids, caustics, solvents, chemicals, oils, gases and air. 

Service Conditions:
Temperature: 500° F/260° 
pH Range: 3-11 (same as Teflon-impregnated asbestos) 
Shaft Speed: Up to 1400 FPM 


TEFLON-OXYGEN SERVICE (#500-OXY) Braided Teflon filament yarns pre-lubricated with a Teflon suspensoid that does not contain any organic lubricant and is approved for oxygen service. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating rods, rams, plungers and agitators, check and needle valve stems

Industries: steam, food processing, power plant, oil and refinery

Recommended usage: all applications where an organic lubricant cannot be used. 

Service Conditions:
Temperature: -450° F/-268°C to 500° F/260° 
pH Range: 0-14
Pressure: Up to 300 psi (rotary/centrifugal)
Shaft Speed: Up to 1000 FPM 


TEFLON-SYNTHETIC (#500-ST) Braided non-asbestos synthetic yarn where the fibers are impregnated with Teflon suspensoid and Teflon particles to seal the packing, thus preventing penetration of chemical fluids and chemical action. After braiding, another coating of Teflon suspensoid and a light oil are applied as a break-in lubricant. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: an excellent general service packing, reciprocating and rotary pumps, helical motion service, agitators, mixers, expansion joints and autoclaves.

Industries: steam, boiler, chemical, pulp and paper mills

Recommended usage: general chemical plant service and conditions; paper stock, mild acids, corrosive acids; petroleum, synthetic oils, moderate alkalis, aromatic and aliphatic solvents, paint, ink and steam 

Service Conditions:
Temperature: -110° F/-79°C to 500° F/260° 
pH Range: 3-12
Pressure: Up to 500 psi (rotary/centrifugal)
Shaft Speed: Up to 1900 FPM


SYNTHETIC TEFLON (#500-T) Braided aramid-type fibers impregnated with Teflon suspensoid and a special long-lasting lubrication. When the braiding is finished, another lubricant is applied that does not contain any wax, silicone or sulphur. 
Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating and rotary pumps, valves, rods, shafts, digesters, liquor pumps, refiners and washer journals.

Industries: steam, valves, chemical, pulp and paper mills

Recommended usage: general service where graphite is not acceptable, chemicals, solvents, acid, steam, waster, severe alkaline, caustic soda 

Service Conditions:
Temperature: 500° F/260° 
pH Range: 1-13 (except concentrated or hot nitric or hot sulfuric acid)
Shaft Speed: Up to 1800 FPM 


TEFLON-KEVLAR (#500-TGK) Braided special Teflon fibers that have been treated with a special compound of graphite. The corners of this packing are made from a Kevlar type of aramid fiber. After braiding, a light coating of an inert oil is applied to ease the break-in period. This construction helps reduce extrusion and increases strength and pressures. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: paper mill stock pumps and agitators; any application where strength and good lubrication qualities are needed. 

Industries: pulp and paper mills

Recommended usage: all conditions and applications of paper mill service where graphite is suitable.

Service Conditions:
Temperature: 500° F/260° 
pH Range: 3-11
Shaft Speed: Up to 2100 FPM


SYNTHETIC-TEFLON-KEVLAR (#505-STK) Braided non-asbestos synthetic yarn where the fiber is impregnated with Teflon suspensoid and Teflon particles, preventing penetration of the packing by chemical fluids and chemical action. The four corners of this packing are reinforced with a Kevlar type of yarn to increase pressure and strength and decrease the rate of extrusion. After braiding, a light oil is applied as break-in lubricant. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: an excellent general service packing; reciprocating and rotary pumps and agitators; centrifugal pumps, and high pressure.

Industries: steam, boiler, chemical, oil and refinery

Recommended usage: general chemical plant service and conditions; mild acids, oil, alkalis, difficult chemicals, caustics, solvents, petroleum, synthetic oil, aromatic and aliphatic solvents; water, air brine and many slurries.

Service Conditions:
Temperature: -170°F/-112°C to 500°F/ 260°C. 
pH Range: 3-12
Pressure: 500 psi (rotary/centrifugal)
Shaft Speed: Up to 1900 FPM 


BRAIDED TEFLON (SOFT) (#510) Braided pure Teflon filament, pre-lubricated to make a softer more flexible packing. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: any equipment where braided packings are commonly used; static and dynamic applications, high-speed rotary shafts, valve stems, expansion joints, reciprocating rods, rams and plungers, and rotary equipment.

Industries: chemical, valves, pulp and paper mills

Recommended usage: the most severe service; all corrosive and oxidizers except molten alkali metals 

Service Conditions:
Temperature: -400°F/-240°C to 500°F/ 260°C
pH Range: 0-14
Pressure: To 300 psi (rotary/centrifugal)
Shaft Speed: Up to 1500 FPM 


SYNTHETIC (#510-ST) Braided non-asbestos synthetic yarn where the fibers are impregnated with Teflon suspensoid and Teflon particles to seal the packing, thus preventing penetration of chemical fluids and chemical action. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: an excellent general service packing; reciprocating and rotary pumps, and agitators 

Industries: valves, steam, chemical, pulp and paper mills, oil and refinery

Recommended usage: mild acids, caustics, valve service, static gasket applications, general chemical plant service and conditions, petroleum, moderate alkalis, air, gas, solvents and wherever break-in lubricant is not wanted.

Service Conditions:
Temperature: 500°F/ 260°C. 
pH Range: 3-11
Shaft Speed: Up to 1900 FPM


BRAIDED TEFLON (HARD) (#515) Manufactured the same way as Style 510 except the pure Teflon filament is not given a break-in lubricant, making this packing much firmer. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating service characterized by high temperature and pressure-- as in triplex pumps; rotating equipment with slow to medium speed, high pressure corrosive service, and filter press service.

Industries: valves, chemical, pulp and paper mills

Recommended usage: chemical, solvents, gases and similar applications where a lubricant other than Teflon is not acceptable. 

Service Conditions:
Temperature: -400°F/-240°C to 500°F/ 260°C
pH Range: 0-14
Shaft Speed: Up to 915 FPM



BRAIDED TEFLON/GRAPHITE (#525-GT) Combines a special Teflon/graphite yarn with another synthetic yarn that has been treated with graphite particles and then lubricated with a special high-speed lubricant. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all reciprocating and rotary shafts

Industries: chemical

Recommended usage: all corrosive chemical usage. 

Service Conditions:
Temperature: 550°F/ 287°C. 
pH Range: 0-14
Shaft Speed: Up to 4900 FPM


BRAIDED SYNTHETIC/GFO (#550) Combines a synthetic non-asbestos yarn with GFO filament yarn so that the GFO is always up against the shaft. This packing is lubricated with a special high-speed lubricant. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all reciprocating and rotary shafts for all equipment

Industries: valves, chemical, oil and refinery

Recommended usage: most corrosive chemical service and conditions. 

Service Conditions:
Temperature: 550°F/ 287°C. 
pH Range: 0-14
Shaft Speed: Up to 4400 FPM



BRAIDED GFO (#550-GFO) Utilizes a braided GFO filament yarn that consists of a pure Teflon yarn lubricated with graphite particles in a matrix, which controls graphite migration and yields a low coefficient of friction in the finished product. It is also lubricated with a high-speed lubricant. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all reciprocating and rotating shafts

Industries: valves, chemical, oil and refinery

Recommended usage: most corrosive and chemical service and conditions. Steam, hot water, solvents, oil, and service suitable for Teflon or graphite. 

Service Conditions:
Temperature: -400°F/-240°C to 550°F/ 287°C. 
pH Range: 0-14
Shaft Speed: Up to 4400 FPM

Note: Not used in oleum, aqua regia, fluororine and fuming nitric acid



BRAIDED GFO/GRAPHITE (#550-GR) Braided 550-GFO construction with four corners reinforced with graphite filament yarns. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all rotating shafts

Industries: boiler, steam, chemical

Recommended usage: high corrosive conditions where additional heat dissipating qualities are required

Service Conditions:
Temperature: 550°F/ 287°C. 
pH Range: 0-14
Shaft Speed: Up to 4400 FPM

Note: Not recommended for high oxidizers


BRAIDED GFO/TEFLON (#550-GT) Braided 550-GFO construction with four corners reinforced with Teflon filament yarns for extra strength. After braiding, a high-speed lubricant is applied. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: inlet and outlet devices, blow pumps and paper mill digesters

Industries: valves, chemical, pulp and paper mills

Recommended usage: high caustic service in paper mills, liquor pumps bleaching chemicals and digester systems

Service Conditions:
Temperature: 500°F/ 260°C.
pH Range: 0-14
Shaft Speed: Up to 2500 FPM


BRAIDED GFO/KEVLAR (#550-K) Braided construction of 550-GFO and a Kevlar type of aramid yarn that combines the strength of the aramid fibers with the heat dissipating and lubricating qualities of the GFO fibers. When braiding is completed, a coating of an inert break-in oil is applied. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: applications where strength and excellent lubricating qualities are required, including paper mill stock pumps, agitators, rods, shafts and expansion joints.

Industries: valves, steam, chemical, pulp and paper mills

Recommended usage: any paper mill condition or service where graphite is suitable, such as water, steam, mild acids, solvents, alkalis and oil 

Service Conditions:
Temperature: 500°F/ 260°C.
pH Range: 3-11
Shaft Speed: Up to 2500 FPM


BRAIDED TEFLON/KEVLAR (#550-TK) Braided construction, combining synthetic yarns with a Kevlar type of aramid fiber yarn. Each strand is impregnated with a Teflon suspensoid so that it seals and fills all the voids. After braiding, it is given another coating of Teflon suspensoid and a light lubricant to improve the break-in period. Sizes: 1/4" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating and rotary pumps and valves, agitators and mixers

Industries: valves, chemical, pulp and paper mills, oil and refinery

Recommended usage: pulp and paper mill applications, chemical applications, caustic soda, and recovery pumps. This packing is an excellent replacement for asbestos because the synthetic yarns retain a greater volume of Teflon and lasts longer than asbestos

Service Conditions:
Temperature: 550°F/ 287°C
pH Range: 3-12
Shaft Speed: Up to 1900 FPM


BRAIDED TEFLON/TEFLON (#550-TT) Braided synthetic yarn where each strand has been individually impregnated with Teflon suspensoid that it seals and fills all the voids. After braiding, the packing is treated again with Teflon suspensoid and a light lubricant to improve the break-in period. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: reciprocating and rotary pumps and valve equipment, agitators, mixers and blenders

Industries: valves, chemical, pulp and paper mills

Recommended usage: pulp and paper mill applications, chemical service, caustic soda, and recovery pumps. This is a high-performance general service packing which is superior to asbestos in performance

Service Conditions:
Temperature: 550°F/ 287°C.
pH Range: 3-12
Shaft Speed: Up to 1900 FPM


BRAIDED TEFLON/GRAPHITE (#555-GT) Braided Teflon fibers treated with a special compound of graphite and a high-speed lubricant. This packing is an excellent replacement for temperature resistant asbestos. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all rotary, reciprocating and centrifugal pumps, agitators and valves

Industries: valves, chemical, oil and refinery

Recommended usage: all corrosive service and applications suitable for Teflon and graphite

Service Conditions:
Temperature: -170°F/-112°C to 550°F/ 287°C
pH Range: 0-14
Pressure: To 500 psi (rotary/centrifugal)
Shaft Speed: Up to 4900 FPM


BRAIDED SYNTHETIC (#600) Square plait braided synthetic yarns where each strand has been individually treated with a special lubricant for superior saturation retention. After braising, this packing is dusted with mica. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: general service for reciprocating and rotary equipment and valves

Industries: steam, chemical, marine, oil and refinery

Recommended usage: mild acids, chemicals, alkalines, brine, oils and steam

Service Conditions:
Temperature: 600°F/ 316°C.
pH Range: 3-11
Shaft Speed: Up to 1900 FPM

BRAIDED CARBON/TEFLON (#600-CT) Braided carbon filament yarn impregnated with Teflon suspensoid to prevent carbon migration and color contamination. The Teflon impregnation also prevents carbon particles from migrating into the pumpage. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: pulp and paper mill equipment, mixers, autoclaves, agitators, valves, stock pumps, blow pumps, steaming vessels, hydroelectric turbines, refiners, outlet devices and top separators.

Industries: valves, steam, boiler, chemical, pulp and paper mills

Recommended usage: most chemical applications except strong oxidizers. Suitable for slurries, acids, strong caustics and bleach.

Service Conditions:
Temperature: -200°F/-129°C to 600°F/316°C 
pH Range: 0-14
Pressure: 300 psi (rotary/centrifugal) 
Shaft Speed: Up to 2400 FPM



BRAIDED SYNTHETIC/GRAPHITE (#600-GR) A special blend of strong synthetic fibers where each individual strand is treated with a special low-friction lubricant and flake graphite before being braided. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: general service on reciprocating and rotary equipment

Industries: steam, chemical, marine, oil and refinery

Recommended usage: mild acids, chemicals, alkalines, brine, oils and steam

Service Conditions:
Temperature: 600°F/ 316°C.
pH Range: 3-11
Shaft Speed: Up to 1900 FPM


NON-METALLIC (#600-NM) Long fiber synthetic yarns with flake graphite and special binders. The graphite minimizes friction while the special binders add resiliency and stability plus resistance to water and oil. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: centrifugal and rotary shafts, valve stems and steam rods

Industries: valves, steam, chemical

Recommended usage: steam, gases, and dilute aqueous solutions (excluding mineral acid solutions)

Service Conditions:
Temperature: 600°F/ 316°C
pH Range: 4-10
Shaft Speed: Up to 3600 FPM


CARBON/GRAPHITE (#650-CG) Braided blend of graphite and carbon yarns which are treated with fine graphite particles throughout. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: general service, rotary and reciprocating shafts, agitators, high temperature valves, centrifugal pumps, ball globes, gate and plug valve stems, and oil drilling 

Industries: valves, boiler, chemical, oil and refinery

Recommended usage: all chemical applications where carbon is suitable. An excellent alternative to 1200-GC. Demonstrates superior frictional characteristics and heat conductivity than either asbestos or Teflon. Boiler feed, hot oils, solvents, strong caustics and acids.

Service Conditions:
Temperature: 1200°F/684°C in steam
650°F/343°C. in oxidizing environment
pH Range: 0-14 (except in strong oxidizers)
Pressure :Up to 300 psi (rotary/centrifugal)
Valves to 2500 psi
Shaft Speed: Up to 3000 FPM


BRAIDED FIBERGLASS (#1000) Square plait braided construction utilizing continuous filament inorganic, flexible fiberglass fibers. Completely incombustible. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: for processing vessels, tanks, grooves, furnace doors, covers, oven doors, flanges and heat expansion joints

Industries: sheet metal, steel fabricators

Recommended usage: most acids, solvents and molten metals 

Service Conditions:
Temperature: 1000°F/538°C 
pH Range: 0-14 

NOTE: This inorganic fiberglass packing is highly resistant to most chemicals (except hydrofluoric, hot phosphoric acid and wet hydrogen chloride). Will not burn or smolder; retains high tensile strength at elevated temperatures while maintaining great flexibility.



BRAIDED FIBERGLASS, SINGLE JACKET (#1000-S/J) Braided construction utilizing continuous filament inorganic, flexible fiberglass fibers that are braided into a single jacket over a center core of twisted fiberglass rope. More stable than 1000-TR. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: for processing vessels, tanks, grooves, furnace doors, covers, oven doors and flanges

Industries: sheet metal, steel fabricators

Recommended usage: most acids, solvents, gases and hot air 

Service Conditions:
Temperature: 1000°F/538°C 
pH Range: 0-14 

NOTE: This inorganic fiberglass packing is highly resistant to most chemicals (except hydrofluoric, hot phosphoric acid and wet hydrogen chloride). Will not burn or smolder; retains high tensile strength at elevated temperatures while maintaining great flexibility. Will not shrink, swell or stretch.


BRAIDED FIBERGLASS, DOUBLE JACKET (#1000-D/J) Braided construction utilizing continuous filament inorganic, flexible fiberglass fibers that are braided into double jackets over a center core of twisted fiberglass rope. More stable and firmer than 1000-S/J; withstands greater mechanical abuse than 1000-S/J. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: for processing vessels, tanks, grooves, furnace doors, covers, oven doors and flanges

Industries: sheet metal, steel fabricators

Recommended usage: most acids, solvents, gases and hot air 

Service Conditions:
Temperature: 1000°F/538°C 
pH Range: 0-14 

NOTE: This inorganic fiberglass packing is highly resistant to most chemicals (except hydrofluoric, hot phosphoric acid and wet hydrogen chloride). Will not burn or smolder; retains high tensile strength at elevated temperatures while maintaining great flexibility. Will not shrink, swell or stretch.


BRAID-OVER-BRAID FIBERGLASS (#1000-B/O/B) Braided construction utilizing continuous filament inorganic, flexible fiberglass fibers featuring braid-over-braid configuration until desired cross-section is reached. This solid braided packing is stronger, denser and firmer than either 1000-S/J or 1000-D/J and capable of withstanding greater mechanical stress. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: for processing vessels, tanks, grooves, seals on furnace and gas generator doors, covers and flanges

Industries: sheet metal, steel fabricators

Recommended usage: most acids, solvents, gases and hot air 

Service Conditions:
Temperature: 1000°F/538°C 
pH Range: 0-14 

NOTE: This inorganic fiberglass packing is highly resistant to most chemicals (except hydrofluoric, hot phosphoric acid and wet hydrogen chloride). Will not burn or smolder; retains high tensile strength at elevated temperatures while maintaining great flexibility. Will not shrink, swell or stretch.


BRAID-OVER-BRAID FIBERGLASS, SQUARE (#1000-B/O/B-SQ) Braided construction utilizing continuous filament inorganic, flexible fiberglass fibers featuring braid-over-braid configuration until desired cross-section is reached. This solid braided packing is stronger, denser and firmer than either 1000-S/J or 1000-D/J and capable of withstanding greater mechanical stress. Similar to 1000-B/O/B but offered with either a square or rectangular cross section. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: for processing vessels, tanks, grooves, seals on furnace and gas generator doors, covers and flanges

Industries: sheet metal, steel fabricators

Recommended usage: most acids, solvents, gases and hot air 

Service Conditions:
Temperature: 1000°F/538°C 
pH Range: 0-14 

NOTE: This inorganic fiberglass packing is highly resistant to most chemicals (except hydrofluoric, hot phosphoric acid and wet hydrogen chloride). Will not burn or smolder; retains high tensile strength at elevated temperatures while maintaining great flexibility. Will not shrink, swell or stretch.



TWISTED FIBERGLASS (#1000-TR) Construction features continuous filament inorganic, flexible fiberglass fibers that are tightly twisted together to form the desired cross section. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: for processing vessels, tanks, grooves, furnace doors, covers, oven doors and flanges

Industries: sheet metal, steel fabricators

Recommended usage: most acids, solvents and molten metals 

Service Conditions:
Temperature: 1000°F/538°C 
pH Range: 0-14 

NOTE: This inorganic fiberglass packing is highly resistant to most chemicals (except hydrofluoric, hot phosphoric acid and wet hydrogen chloride). Will not burn or smolder; retains high tensile strength at elevated temperatures while maintaining great flexibility. Will not shrink, swell or stretch.


CARBON-INCONEL (#1200-CIJ) Construction features include braided carbon yarn, Inconel wire insert, a graphite and plastic center core, and molybdenum coating. All organic materials, which tend to carbonize (due to extremely high temperatures), are eliminated, thus reducing adjustments required and loss of packing volume while in service. A corrosive-resistant inhibitor is compounded into the packing to protect valves that have been hydrostatically tested and stored. The rust inhibitor does not impair the performance of the packing. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: valves, valve stems; rotary, centrifugal and reciprocating pumps

Industries: boiler, power plant, oil and refinery

Recommended usage: power plant packing, turbines, expansion joints, steam, superheated steam, hot gases, high temperature and high-pressure service conditions

Service Conditions:
Temperature: 1200°F/649°C 
pH Range: 4-10 
Pressure: 2500 psi



PURE GRAPHITE (#1200-G) Braided pure graphite filament yarn, which has a low coefficient of friction. A lightweight yarn which increases the yield (feet per pound) compared with asbestos or Teflon. Inasmuch as graphite is an excellent heat conductor, this packing dissipates heat in the stuffing box, allowing a much higher shaft speed.
Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: all rotary and reciprocating shafts, valves, dryers, blowers, churns and agitators. An excellent packing for top separators and outlet devices on continuous pump digesters.

Industries: valves, marine, chemical, pulp and paper mills

Recommended usage: chemicals, acids, non-oxidizing mineral acids, fuel oil, high pressure steam, strong caustics, boiler feed pumps, extreme hot water, control valves and aromatic and aliphatic solutions


Service Conditions:
Temperature: 1200°F/649°C in steam
800°F /427°C in oxidizing environment
-200°F /-129°C 
pH Range: 0-14 
Shaft Speed: Up to 3600 FPM

NOTE: Not recommended for fuming nitric acid, oleum and fluorine



GRAPHITE-GRAPHITE [NUCLEAR GRADE PACKING] (#1200-GG) Braided pure graphite filament yarn impregnated with a sub micron powdered inorganic pure graphite. After braiding, a lubricant is applied to provide a film between the shaft and the packing. Sizes: 1/8" to 1" square in increments of 1/16" standard, consult factory for sizes larger than 1". 

Service: boiler feed pumps, reciprocating and plunger rods, high speed shafts, valves, mixers, continuous digesters, agitator shafts, and in those severe service conditions where minimum leakage is critical.

Industries: nuclear power plants

Recommended usage: strong caustics, strong acids, natural petroleum, synthetic oils, aromatic and aliphatic solvents, steam, water. Throughout the entire pH Range, this packing is virtually inert.

Service Conditions:
Temperature: 6000°F /3316°C in non-oxidizing agents
1200°F/649°C in steam
800°F/427°C in oxidizers
-200°F /-129°C 
pH Range: 0-14 
Shaft Speed: Up to 4000 FPM

NOTE: Not recommended for fuming nitric acid, oleum and fluorine

             Home | A Short Introduction | Our Products | Our Services | TOPOG-E® Boiler Gaskets | What's New at AGIS? | Request for Information/Quote

16 Poplar Street,  Ambler, PA 19002
Phone: 215-646-8010  Fax:215-646-8013
E-mail:
sales@agismfg.com