IGetMail Automatically Downloads email and forwards your email to your Exchange Server or remote SMTP Server

IGetMail - How to Setup Exchange Server 2003

Follow the steps below to correctly configure your Exchange Server 2003 e-mail server for general use, and for use with IGetMail.

Pre-Installation Checklist

Make sure you have all of the following steps in place before you setup Exchange Server 2003.

For simplicity we are assuming you are setting up a small office where one machine will be used for both the Active Directory and the Exchange Server. This setup works just fine and reduces the number of machines to maintain. If you have a larger office you may want to consider separating the Active Directory machine and the Exchange 2003 Server.

  1. You must have IIS (Internet Information Server) installed.
    When you install IIS, you should select the typical install that includes an SMTP component.

  2. Make sure your networking has DNS setup.
    If you use DHCP, the DNS setting should be set, if you do not use DHCP then make sure that you have entered your DNS server names. Exchange Server will use your DNS settings when it sends e-mail to the Internet.

  3. You must have Active Directory setup. 
    To setup active directory, go to Start -> Programs -> Administrative tools -> Configure your server.
    Select Active Directory from the left hand panel, then select "Start" in the right hand panel to start the setup wizard.

    1. Select "Domain controller for a new domain" 

    2. Take the default - Create a new domain tree 

    3. Create a new forest of domain trees 

    4. When it asks for your full DNS name - enter the name of your domain that you have registered. This would be the name to the right of the "@" for your email address, such as "YourCompany.com"

    5. Accept the Netbios equivalent of your domain in our case "YourCompany"

    6. Select the locations you want to store the databases

    7. Accept the location of the system folder

    8. On the permissions screen select what is appropriate for your network; if all machines are Windows 2003, then select the only Windows 2003 permissions. Otherwise use the default for compatibility.

    9. Create a password to administer the directory.

    10. Review your configuration and accept by pressing Next.

    After pressing next - the Active Directory configuration wizard will spend several minutes creating the directory for you. When it is complete press finish and reboot the computer.

Configuring the Exchange Server 2003

Run the Exchange Server Setup - it will walk you through the following wizard

  1. Agree to the licenses agreement 

  2. Enter your serial number

  3. The next screen will prompt you to select what components you want to install.  The typical configuration is selected. This should be fine with most installation.  If you need you can enable any additional services you wish.

  4. At the installation type screen - we are setting up a new organization, so we have used the default selection “Create a new Exchange Organization”.

  5. At the organization name screen - enter the name of your company

  6. Agree to the license statement

  7. Review the your selections and press next to begin

The installation wizard will now install the components you have selected - this will take several minutes to 1/2 hour.  When it is complete you are ready to add your users.

Adding E-Mail Users

Go to the start menu -> Programs -> Microsoft Exchange -> Active Directory Users and Computers

On the left hand side of the screen, select users.  Then right click in the right hand panel and select "New" and at the sub menu select "User". You will be presented with a wizard where you enter the users name and e-mail address. Then press next and enter that users password and press next. On the last screen select that you want to create an Exchange Mailbox. When you press finish the user is created and you are ready to enter another user name.

Now that you have setup your Exchange Server
you need to backup your Exchange Server.
Try Backup for Workgroups to backup your Exchange Server.


A Great Backup Product for IT Consultants, VARS and software installers!

 

Everyday, thousands of corporations, non-profits, and Government agencies use IGetMail software to download their email from remote Servers!  You can too!

Copyright © 1999-2021. All rights reserved.  Lockstep Systems, Inc.  *  info@lockstep.com | Privacy Information